For your 2002 Land Rover Range Rover with factory raised rails we have the Inno Roof Rack part numbers # INB147 and # INFR which is a confirmed fit. It clamps and wraps around the rail and does not require a mounting hole at all. view full answer...
So you referenced a 2008 Land Rover Range Rover Sport and we have a quick-install harness that fits that vehicle as long as it comes with the factory tow package. The part # 3035-P is a confirmed fit and plugs into the vehicle's wiring under the dash which will then allow you to connect a proportional brake controller like the P3 part # 90195. It would be a very painless install. view full answer...
Since your tires are brand new they will most likely last you a while. I would go with the Thule chains part # TH01571265 that you referenced since they are confirmed as a fit for the 255/55R19.
This chain size will not fit the other two sizes you mentioned so I would wait till you know for certain that you would upgrade to the larger tires before you pick out a set of chains for them as well.
I attached an install video for these chains for you to check out as well.
Be sure to check... view full answer...
The Rhino-Rack ROC25 Roof Rack # RR94XR is a compatible roof rack for the 2017 Land Rover Range Rover SPORT but not your vehicle if it's the larger non-sport version. Ever since the Land Rover Range Rover entered its fourth generation in 2012, its new design made it that most brands couldn't make custom fit roof racks for it. Most roof racks are made for the Range Rover Sport line instead.
The best option for a roof rack is to use the SeaSucker Monkey Bars Roof Rack # 298-SX6000B. It is... view full answer...
For your 2019 Land Rover Range Rover with a naked roof there is only one option available and that is the SeaSucker roof rack part # 298-SX6000B which uses vacuum cups to attach to the roof of your vehicle. This rack design is very strong, requires no permanent modifications to your vehicle, and also is easily transferable to future vehicles so it really is a great option. I attached a picture of what it looks like installed as well as a review video on a similar Range Rover for more info... view full answer...
We do have a trailer hitch receiver and I'd be happy to recommend a Thule 4-bike rack for your 2016 Land Rover LR4. To start, the hitch that fits is the Curt Trailer Hitch Receiver # 13456.
This is a confirmed fit by the manufacturer, and I have added a cut out from our reviews section a customer sent in that put this hitch on their '16 LR4. I have also added a link to the instructions for you to check out.
This hitch has a 2" receiver and there are a couple Thule 4-bike racks I recommend,... view full answer...
That's because for your 2012 Land Rover Range Rover Sport HSE there isn't a plug and play style of trailer wiring connector for your vehicle. You'll have to hardwire in a trailer wiring kit like with the ZCI part # 119250KIT which actually uses sensors to connect to your taillight wiring so you don't have to splice into the wiring at all.
The part # 118624 that you referenced fits the Evoque models which are different from what you have. view full answer...
Yes, the plow kit part numbers # K2RAMP8219 with the mounting bracket part # K289010 are a confirmed fit for your 1998 Land Rover Range Rover Discovery.
Basically the plow can fit any vehicle that there is install hardware for. And the part # K289010 is a fit for your Range Rover so it would be a great option. view full answer...
For your 2021 Land Rover Range Rover Sport we have the Draw Tite hitch part # 75229 which fits with the full size spare. This is the best option for you since the Curt equivalent does not fit with the full size spare.
This hitch will work great with your Thule bike rack as well. view full answer...
The longest fixed ball mount we offer is the Hidden Hitch Ball Mount part # 80232 which measures 15-3/4" from the center of the hitch pin hole to the center of the ball hole. Please note, it does have a 6,000 lb weight capacity and can be used in either the rise position at 3/4" or drop position at 2". In order to add a 2" hitch ball you'd need the part # C40004.
I have attached for you below a list of other possible options with long shanks if the above won't work. view full answer...
The Curt Trailer Hitch Receiver # C13396 is confirmed to fit your 2017 Land Rover Discovery Sport unless you have 3rd row seating. This 2" class III receiver has a maximum tongue weight for 675lbs and towing capacity of 4,500lbs. Be sure to verify your capacities with your Land Rover dealer.
I recommend the Thule Hitching Post Pro # TH934XTR for being able to carry up to 4 bikes up to 35lbs each, with your Land Rover. It has 3 mounting points to eliminate the bikes from moving front to... view full answer...
I have a great tire chain solution. Since you have very limited inner sidewall clearance on your vehicle and are running a different tire size than what your vehicle came with the best solution we have is the Konig K-Summit chains part # TH02230K77. Unlike most tire chains these do not require any inner sidewall clearance so we can promise that you won't have any clearance issues. view full answer...
It sounds like the 7-way on your 2015 Land Rover LR4 is not getting the signal that the trailer is connected at times, which you are correct, is due to the LED lights on your trailer, and the fact that they have such little power draw. That means the 7-way is not "recognizing" the trailer connection when you are in reverse or signaling. The 7-Way Trailer Adapter for Towing Trailers with LED Lights # C57003 was a good idea, but if that did not work the next option I suggest is to add LED... view full answer...
I do have a solution for you but there are no trunk mount bike racks listed as a fit for the 2016 Land Rover Range Rover Sport. What I recommend is to use multipurpose ball mount # D210. It will allow you to carry a hitch mount bike rack and tow the trailer at the same time. If you can tell me how many bikes you need to carry I can make a bike rack recommendation.
Or another option is to use a towing bike rack. There are several towing bike racks available and I have included a link to... view full answer...
Your 2012 Land Rover Range Rover HSE having a 7-way connector does not mean it has a brake controller installed. It is a good thing it has a 7-way as that makes installing a controller easy, but yours would only have trailer lighting options active currently.
For a brake controller you need an install harness and the controller itself.
For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it... view full answer...
Absolutely!
Starting with the hitch for your 2020 Land Rover Range Rover Sport, I highly recommend the Curt Class III # C13243 because of its superior black powder coat finish that tends to last longer than those from other manufacturers. This custom hitch will use existing holes in the vehicle's frame rails for a simple bolt-on (no-drill) installation and it features a robust 8,000 pound towing weight capacity.
I have attached the written installation manual below that you can also... view full answer...
You are on the right track and have picked out the best setup to add trailer lights to a hitch mounted bike rack.
For a 4-way for your 2015 Land Rover Evoque you would want the part # 119250KIT and then for a kit with lights you would want the part # 98174LED that would attach to the 4-way. For brackets then the part # BK70BB would allow you to mount the lights. view full answer...
I have a solution that would allow you to mount a snow plow at the rear of your 2009 Land Rover Range Rover Sport, but not at the front since we don't carry any front hitches for your vehicle.
For a hitch for the rear of your vehicle (if you do not have one already) you would want the Curt part # 13456 which is a confirmed fit as long as you have an HSE model.
Then for a smaller plow that would work well for you I would recommend the K2 # K2AVAL8219. Check out the review video link I... view full answer...
Yes, the Thule Tire Chains XG12 part # TH2004705265 that you referenced are a confirmed fit for the tire size 255/55-19 that you have on your 2008 Land Rover LR3.
You will still want to check the owners manual of your vehicle for any tire chain restrictions. view full answer...
Go To Results